Vážený zákazníku, v případě, že se Vám zobrazují ceny v EUR, přepněte prosím vpravo nahoře měnu na CZK
Keine Produkte
Washable plastic construction. A frame design. Brightly coloured for visibility. Warns people of spills and slip hazards.
TCT cutting edges. Strong, hardened steel shanks. Twin fluted for smooth finish. For biscuit joints, slots and grooves. Max 12,000rpm. Use 13mm bearing for No. 20 biscuits and 19mm bearing for No.10 biscuits.
TCT cutting edges. Strong, hardened steel shanks. Twin fluted for smooth finish. For trimming laminated boards and veneers and template routing. Max 13,000rpm.
TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming. Max 10,000rpm.
TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming. Max 10,000rpm.
TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming. Max 24,000rpm.
TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming. Max 24,000rpm.
Comprehensive panel door 1/2" shank router cutter set with TCT cutting edges and strong, hardened steel shanks. Includes 2 x 1/2" rail and stile bits, and 1 x 1/2" raised panel bit.
TCT cutting edges and strong, hardened steel shanks. Includes: Straight: 6 x 20mm, 12 x 20mm, 16 x 20mm; 90° grooving: D12.7mm; Dovetail: D12.7mm; 45° chamfer: D32mm; Bearing flush trim: 12.7 x 13mm; Rounding over: R6.3mm D22.2mm, R9.5 D28.6mm; Cove box: R6.3 D12.7mm; Cove: R6.3 D22.2mm; Roman ogee: R4 D25.5mm.
TCT cutting edges and strong, hardened steel shanks. Includes: Straight bits 5, 6, 8, 10, 12, 14, 16, 18 and 20mm; Dovetail: 12.7mm; V Groove: 9.5mm, 12.7mm, R6.3mm; Cove box: R3.2mm, R6.3mm; Classical: 12.7mm; Flush trim: 12.7mm; Chamfer: 16mm, 32mm; Roman ogee R4mm; Rebater 28.6mm; Cove bit: R9.5mm; Rounding Over: R3.2mm, R6.3mm, R7.9mm, R9.5mm; Beading...
TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For template routing.
TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For template routing. Max 24,000rpm.